Mitsubishi Lancer Parts | Complete Car Parts

Showing 1 of 2 pages. About 65 results

Sort:

Show:

Air System, Springs and Components Shocks and Struts Links, Joints & Control Arms

Image

Brand

Part #

Product

Shipping

Price

Part #: K750385

Suspension Stabilizer Bar Link for Chrysler Daewoo Dodge Jeep Mazda Mitsubishi - Moog K750385

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K750385

Suspension Stabilizer Bar Link for Chrysler Daewoo Dodge Jeep Mazda Mitsubishi - QuickSteer K750385

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: ES800471

Outer Steering Tie Rod End for Mitsubishi Lancer Outlander Outlander PHEV Outlander Sport RVR - Moog ES800471

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES800471

Outer Steering Tie Rod End for Mitsubishi Lancer Outlander Outlander PHEV Outlander Sport RVR - QuickSteer ES800471

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: SB114

Suspension Strut Bellows for Audi BMW Chrysler Dodge Hyundai Jeep Kia Land Rover Mitsubishi Nissan Toyota Volvo - KYB SB114

0 out of 5 stars

0 total ratings

Part #: K750289

Suspension Stabilizer Bar Link for Chrysler Dodge Jeep Mitsubishi - Moog K750289

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K750289

Suspension Stabilizer Bar Link for Chrysler Dodge Jeep Mitsubishi - QuickSteer K750289

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 341444

Rear Suspension Strut for 2008-2016 Mitsubishi Lancer - 341444 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: EV801085

Inner Steering Tie Rod End for Mitsubishi Lancer Outlander Outlander Sport RVR - Moog EV801085

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: SM5657

Front Suspension Strut Mount Kit for Mitsubishi Lancer Outlander Outlander Sport RVR - SM5657 KYB

0 out of 5 stars

0 total ratings

Part #: SM5091

Suspension Strut Mount Kit for Chrysler Dodge Eagle Hyundai Kia Mitsubishi Plymouth Volvo - SM5091 KYB

0 out of 5 stars

0 total ratings

Part #: ES800219

Outer Steering Tie Rod End for Mitsubishi Eclipse Endeavor Galant Lancer - Moog ES800219

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES800219

Outer Steering Tie Rod End for Mitsubishi Eclipse Endeavor Galant Lancer - QuickSteer ES800219

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: TA2639

Outer Steering Tie Rod End for Mitsubishi ASX Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TA2639

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: EV800638

Inner Steering Tie Rod End for Mitsubishi Lancer Outlander - Moog EV800638

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: EV800638

Inner Steering Tie Rod End for Mitsubishi Lancer Outlander - QuickSteer EV800638

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: RK620548

Front Left Lower Suspension Control Arm and Ball Joint Assembly for Mitsubishi Lancer Outlander Outlander Sport RVR - Moog RK620548

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK620549

Front Right Lower Suspension Control Arm and Ball Joint Assembly for Mitsubishi Lancer Outlander Outlander Sport RVR - Moog RK620549

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: 22-213846

Front Right Suspension Strut Assembly for 2008-2016 Mitsubishi Lancer - 22-213846 Bilstein

0 out of 5 stars

0 total ratings

Direct Replacement
Bilstein is an OEM German Parts Manufacturer

Part #: 339105

Front Left Suspension Strut for 2008-2016 Mitsubishi Lancer - 339105 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: TC2349

Front Lower Suspension Ball Joint for Mitsubishi Lancer Outlander Outlander Sport RVR - Delphi TC2349

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: TC2605

Rear Lower Forward Suspension Control Arm for Mitsubishi Lancer Outlander - Delphi TC2605

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TA2620

Inner Steering Tie Rod End for Mitsubishi Lancer Outlander - Delphi TA2620

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 339104

Front Right Suspension Strut for 2008-2016 Mitsubishi Lancer - 339104 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: RK100114

Rear Upper Suspension Control Arm for Dodge Jeep Mitsubishi - Moog RK100114

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: 339083

Front Left Suspension Strut for 2008-2014 Mitsubishi Lancer - 339083 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: 339082

Front Right Suspension Strut for 2008-2014 Mitsubishi Lancer - 339082 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: TC8287

Front Suspension Stabilizer Bar Link for Mitsubishi Eclipse Cross Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TC8287

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: RK642642

Rear Lower Forward Suspension Control Arm for Mitsubishi Lancer Outlander RVR - Moog RK642642

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK622990

Front Right Lower Suspension Control Arm and Ball Joint Assembly for 2009-2015 Mitsubishi Lancer AWD - Moog RK622990

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: K200800

Front Lower Rearward Suspension Control Arm Bushing for Dodge Jeep Mitsubishi - MOOG K200800

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: RK100321

Rear Upper Suspension Control Arm for Dodge Jeep Mitsubishi - Moog RK100321

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TC5966

Rear Upper Control Arm for Dodge Jeep Mitsubishi - Delphi TC5966

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: RK622989

Front Left Lower Suspension Control Arm and Ball Joint Assembly for 2009-2015 Mitsubishi Lancer AWD - Moog RK622989

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK642134

Rear Upper Suspension Control Arm for Mitsubishi Lancer Outlander - Moog RK642134

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TC2345

Front Right Lower Control Arm & Ball Joint for Mitsubishi ASX Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TC2345

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: EV801262

Inner Steering Tie Rod End for 2010-2015 Mitsubishi Lancer AWD - Moog EV801262

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: TC3272

Rear Upper Suspension Control Arm for Mitsubishi Lancer Outlander RVR - Delphi TC3272

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC2289

Rear Suspension Stabilizer Bar Link for Chrysler Dodge Jeep Mitsubishi - Delphi TC2289

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure

Part #: TC2344

Front Left Lower Control Arm & Ball Joint for Mitsubishi ASX Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TC2344

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC5091

Suspension Stabilizer Bar Link for Mitsubishi Lancer Outlander - Delphi TC5091

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TA3164

Inner Steering Tie Rod End for Mitsubishi Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TA3164

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC7357

Rear Suspension Stabilizer Bar Link for 2008-2015 Mitsubishi Lancer - Delphi TC7357

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 521-306

Front Right Lower Suspension Control Arm and Ball Joint for Mitsubishi - 521-306 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings
Manufactured for safety and reliability

Part #: 19-213859

Rear Shock Absorber for 2008-2016 Mitsubishi Lancer - 19-213859 Bilstein

0 out of 5 stars

0 total ratings

Best Quality Standards in the Market
Bilstein is an OEM German Parts Manufacturer.
High traction and precise handling thanks to BILSTEIN gas-pressure technology.
Constant damping power under any load.

Part #: K750198

Front Right Suspension Stabilizer Bar Link for 2003-2015 Mitsubishi Lancer AWD - Moog K750198

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: TD1253W

Suspension Control Arm Bushing for Mitsubishi Lancer Outlander Outlander PHEV Outlander Sport RVR - Delphi TD1253W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: 524-094

Suspension Control Arm for Mitsubishi Lancer Outlander Outlander Sport RVR - 524-094 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: K750196

Suspension Stabilizer Bar Link for Mitsubishi Lancer Outlander - Moog K750196

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K750196

Suspension Stabilizer Bar Link for Mitsubishi Lancer Outlander - QuickSteer K750196

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Suspension

Filters

$45.37

$39.05

$44.19

$39.93

$49.05

$45.62

$39.79

$99.91

$46.31

$73.97

$32.44

$40.36

$35.65

$36.32

$56.79

$50.48

$98.86

$98.86

$144.75

$127.44

$37.64

$43.49

$40.65

$127.44

$163.72

$129.84

$129.84

$31.79

$54.29

$158.10

$46.79

$164.26

$142.45

$158.77

$63.39

$96.21

$55.62

$47.14

$41.27

$96.23

$32.10

$33.81

$45.81

$83.87

$100.10

$41.46

$32.57

$58.67

$41.46

$39.02

Shopping Cart: 0 Items

Total: $0.00

Your Wishlist: 0 Items

Total: $0.00