Plymouth Breeze Parts | Complete Car Parts

Showing 1 of 2 pages. About 58 results

Sort:

Show:

Air System, Springs and Components Shocks and Struts Links, Joints & Control Arms

Image

Brand

Part #

Product

Shipping

Price

Part #: 15360

Rear Complete Strut & Coil Spring Assembly for Chrysler Dodge Stratus Cirrus & Plymouth Breeze

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: 2-15360-001

Rear Pair Complete Strut and Coil Spring Assemblies for Chrysler Dodge Plymouth Breeze Cirrus Stratus

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring.
Warranty: 1 Year against manufacturing defects - free return shipping covered

Part #: K7306

Suspension Stabilizer Bar Link for Chevrolet Chrysler Dodge Ford Hyundai Mercury Mitsubishi Nissan Plymouth Toyota - Moog K7306

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K7306

Suspension Stabilizer Bar Link for Chevrolet Chrysler Dodge Ford Hyundai Mercury Mitsubishi Nissan Plymouth Toyota - QuickSteer K7306

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K700530

Suspension Stabilizer Bar Link for Chevrolet Chrysler Dodge Ford Jeep Nissan Plymouth Toyota - Moog K700530

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: 901940

Suspension Strut Mount for Acura Chrysler Dodge Honda Isuzu Plymouth - 901940 Monroe

0 out of 5 stars

0 total ratings

Engineered for superior fit and performance
Replacing all your worn strut mounting components ensures a complete repair

Part #: ES80361

Left Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog ES80361

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES80361

Left Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer ES80361

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: ES80360

Right Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog ES80360

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES80360

Right Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer ES80360

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 344609

Front Suspension Strut for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - 344609 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: RK620241

Front Left Upper Suspension Control Arm and Ball Joint Assembly for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog RK620241

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: K7290

Front Upper Suspension Control Arm Bushing Kit for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7290

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: 344610

Rear Suspension Strut for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - 344610 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: 520-369

Front Left Upper Suspension Control Arm and Ball Joint for Chrysler Dodge Plymouth - 520-369 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings

Part #: RK7425

Front Left Lower Suspension Control Arm and Ball Joint Assembly for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog RK7425

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK620240

Front Right Upper Suspension Control Arm and Ball Joint Assembly for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog RK620240

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK7427

Front Right Lower Suspension Control Arm and Ball Joint Assembly for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog RK7427

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TD4574W

Rear Suspension Strut Rod Bushing Kit for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TD4574W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: 520-370

Front Right Upper Suspension Control Arm and Ball Joint Assembly Chrysler Dodge Plymouth - 520-370 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: K7451

Front Upper Suspension Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7451

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7451

Front Upper Suspension Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer K7451

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 520-301

Front Left Lower Suspension Control Arm and Ball Joint for Chrysler Dodge Plymouth - 520-301 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings

Part #: SM5262

Front Upper Suspension Shock / Strut Mount Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - KYB SM5262

0 out of 5 stars

0 total ratings

Part #: EV323

Inner Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze FWD - Moog EV323

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: K7426

Suspension Strut Rod Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7426

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: EV323

Inner Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer EV323

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: TC5352

Front Right Lower Control Arm & Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TC5352

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: K200785

Front Lower Rearward Suspension Control Arm Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K200785

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: TC5527

Suspension Stabilizer Bar Link - Delphi TC5527

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure

Part #: TC5748

Front Left Upper Control Arm & Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TC5748

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 521-983

Lateral Arm for Chrysler Breeze Cirrus Sebring Stratus Dodge Stratus Plymouth Breeze - 521-983 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings

Part #: 924-414

Front Right Upper Shock Mount for Chrysler Breeze Cirrus Sebring Stratus Dodge Stratus Plymouth Breeze - Dorman 924-414

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: TA5267

Inner Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TA5267

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 905-535

Suspension Trailing Arm for Chrysler Breeze Cirrus Sebring Stratus Dodge Stratus Plymouth Breeze - 905-535 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 924-416

Front Left Upper Shock Mount for Chrysler Breeze Cirrus Sebring Stratus Dodge Stratus Plymouth Breeze - Dorman 924-416

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 520-302

Front Right Lower Suspension Control Arm and Ball Joint for Chrysler Dodge Plymouth - 520-302 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings

Part #: SM5137

Rear Suspension Strut Mount for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - KYB SM5137

0 out of 5 stars

0 total ratings

Part #: K200050

Suspension Stabilizer Bar Bushing Kit for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K200050

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K200719

Rear Upper Suspension Control Arm Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K200719

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7218

Suspension Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7218

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7435

Front Lower Outer Suspension Control Arm Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7435

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7474

Suspension Control Arm Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - MOOG K7474

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7212

Suspension Control Arm Bushing for Chrysler Dodge Eagle Plymouth - QuickSteer K7212

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K7218

Suspension Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer K7218

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K7474

Suspension Control Arm Bushing for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - QuickSteer K7474

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K90308

Suspension Stabilizer Bar Link Kit for American Motors Chevrolet Chrysler Dodge Eagle Hyundai Mitsubishi Nissan Plymouth Toyota - QuickSteer K90308

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: TA2294

Left Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TA2294

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TA2295

Right Outer Steering Tie Rod End for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TA2295

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC1632

Suspension Ball Joint for Chrysler Cirrus Sebring Dodge Stratus Plymouth Breeze - Delphi TC1632

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Suspension

Filters

$62.96

$112.39

$57.74

$52.39

$30.42

$25.98

$63.17

$59.97

$63.17

$59.97

$80.19

$61.13

$38.47

$88.82

$46.48

$131.13

$61.13

$131.13

$33.89

$46.48

$106.62

$114.60

$131.90

$32.21

$78.38

$37.69

$81.71

$91.85

$39.13

$25.21

$50.95

$67.62

$212.71

$53.23

$54.57

$264.13

$104.36

$46.27

$27.67

$29.68

$52.59

$27.19

$45.36

$28.17

$63.43

$43.84

$20.35

$41.97

$41.97

$62.69

Shopping Cart: 0 Items

Total: $0.00

Your Wishlist: 0 Items

Total: $0.00