Chrysler Intrepid Parts | Complete Car Parts

Showing 1 of 2 pages. About 66 results

Sort:

Show:

Air System, Springs and Components Shocks and Struts Gaskets and Sealing Systems Links, Joints & Control Arms

Image

Brand

Part #

Product

Shipping

Price

Part #: K7342

Front Suspension Stabilizer Bar Link for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog K7342

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K7342

Front Suspension Stabilizer Bar Link for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - QuickSteer K7342

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 15170

Rear Complete Strut & Coil Spring Assembly for Chrysler 300M LHS Concorde & Dodge Intrepid

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: 905-542

Front Suspension Strut Rod for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - 905-542 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: K8516

Suspension Strut Rod Bushing Kit for Chrysler Dodge Eagle Ford Lincoln Mercury - MOOG K8516

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K8516

Suspension Strut Rod Bushing Kit for Chrysler Dodge Eagle Ford Lincoln Mercury - QuickSteer K8516

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 520-303

Front Left Lower Suspension Control Arm and Ball Joint Assembly Chrysler Dodge Eagle - 520-303 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: ES3529

Outer Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog ES3529

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES3529

Outer Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - QuickSteer ES3529

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: 520-304

Front Right Lower Suspension Control Arm and Ball Joint for Chrysler Dodge Eagle - 520-304 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings

Part #: 11172

Front Right Complete Strut & Coil Spring Assembly for Chrysler 300M LHS Concorde & Dodge Intrepid

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: RK7211

Front Left Lower Suspension Control Arm and Ball Joint Assembly for Chrysler Dodge Eagle FWD - Moog RK7211

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: 2-15170-001

Rear Pair Complete Strut and Coil Spring Assemblies for Chrysler Dodge 300M Concorde Intrepid LHS

5 out of 5 stars

2 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring.
Warranty: 1 Year against manufacturing defects - free return shipping covered

Part #: K7433

Rear Suspension Stabilizer Bar Link for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog K7433

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K8613

Suspension Control Arm Bushing for Chrysler Dodge Eagle Ford Lincoln Mercury - MOOG K8613

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7433

Rear Suspension Stabilizer Bar Link for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - QuickSteer K7433

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K8613

Suspension Control Arm Bushing for Chrysler Dodge Eagle Ford Lincoln Mercury - QuickSteer K8613

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: RK7213

Front Right Lower Suspension Control Arm and Ball Joint Assembly for Chrysler Dodge Eagle FWD - Moog RK7213

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: 11171

Front Left Complete Strut & Coil Spring Assembly for Chrysler 300M LHS Concorde & Dodge Intrepid

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: 2-11171-11172-001

Front Pair Complete Strut and Coil Spring Assemblies for Chrysler Dodge 300M Concorde Intrepid LHS

5 out of 5 stars

4 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring.
Warranty: 1 Year against manufacturing defects - free return shipping covered

Part #: 4-11171-15170-001

Front & Rear Complete Strut & Coil Spring Assemblies for Chrysler Dodge 300M Concorde Intrepid LHS FWD

5 out of 5 stars

1 total ratings

• This Kit Comes with 4 Pre-assembled Complete Strut & Coil Spring Assemblies
• Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
• Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
• Warranty: 1 Year against manufacturing defects

Part #: ES3531

Right Inner Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog ES3531

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: K8452

Suspension Control Arm Bushing for Chrysler Dodge Eagle Ford Lincoln Mercury - MOOG K8452

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: ES3531

Right Inner Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - QuickSteer ES3531

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: K8452

Suspension Control Arm Bushing for Chrysler Dodge Eagle Ford Lincoln Mercury - QuickSteer K8452

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: SM5576

Front Upper Coil Spring Insulator for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - KYB SM5576

0 out of 5 stars

0 total ratings

Part #: SR4070

Rear KYB Complete Strut and Coil Spring Assembly for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - SR4070

0 out of 5 stars

0 total ratings

Part #: RK7331

Rear Lower Rearward Suspension Control Arm for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog RK7331

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: SM5167

Front Suspension Strut Mount Kit for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - SM5167 KYB

0 out of 5 stars

0 total ratings

Part #: ES3532

Left Inner Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - Moog ES3532

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Loose or worn chassis parts can lead to premature tire wear
RESTORES RIDE -- Provides revamped steering and handling feel
Ensamblado en USA
Assembled in the USA
Engineered to meet or exceed OE standards
Includes any necessary hardware

Part #: ES3532

Left Inner Steering Tie Rod End for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - QuickSteer ES3532

0 out of 5 stars

0 total ratings

Delivers dependable performance
Designed for smooth, quiet operation
Offers ease of installation

Part #: TC2205

Front Right Lower Control Arm & Ball Joint for Chrysler 300M Concorde Intrepid LHS New Yorker Dodge Intrepid Eagle Vision - Delphi TC2205

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 521-945

Lateral Arm for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - Dorman 521-945

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 905-700

Front Lower Shock Mount Insulator for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - Dorman 905-700

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 235617

Front Right Suspension Strut for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - 235617 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: 235618

Front Left Suspension Strut for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - 235618 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: 235619

Rear Suspension Strut for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid FWD - 235619 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: SM5168

Rear Suspension Strut Mount for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - KYB SM5168

0 out of 5 stars

0 total ratings

Part #: SM5579

Front Lower Coil Spring Insulator for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - KYB SM5579

0 out of 5 stars

0 total ratings

Part #: SM5590

Rear Upper Coil Spring Insulator for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - KYB SM5590

0 out of 5 stars

0 total ratings

Part #: SM5591

Rear Lower Coil Spring Insulator for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - KYB SM5591

0 out of 5 stars

0 total ratings

Part #: SR4060

Front Right KYB Complete Strut and Coil Spring Assembly for Chrysler Dodge FWD - SR4060

0 out of 5 stars

0 total ratings

Part #: SR4061

Front Left KYB Complete Strut and Coil Spring Assembly for Chrysler Dodge FWD - SR4061

0 out of 5 stars

0 total ratings

Part #: CK7211

Front Left Lower Suspension Control Arm and Ball Joint Assembly for Chrysler Dodge Eagle FWD - Moog CK7211

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: K160144

Front Upper Coil Spring Seat for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - MOOG K160144

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K160147

Front Lower Coil Spring Seat for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - MOOG K160147

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K3181

Rear Suspension Stabilizer Bar Link for Chrysler 300M Concorde Intrepid LHS New Yorker Dodge Intrepid Eagle Vision FWD - Moog K3181

0 out of 5 stars

0 total ratings

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Part #: K7254

Front Suspension Strut Mount for Chrysler 300M Concorde Intrepid LHS Dodge Intrepid - MOOG K7254

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7367

Suspension Stabilizer Bar Bushing Kit for Chrysler 300M Concorde Intrepid LHS New Yorker Dodge Intrepid Eagle Vision - MOOG K7367

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K7368

Suspension Stabilizer Bar Bushing Kit for Chrysler 300M Concorde Intrepid LHS New Yorker Dodge Intrepid Eagle Vision - MOOG K7368

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Suspension

Filters

$52.98

$51.01

$83.76

$80.08

$47.59

$44.32

$58.34

$52.07

$48.96

$58.34

$115.33

$44.79

$156.05

$42.02

$27.42

$37.82

$25.56

$44.79

$115.33

$216.84

$386.59

$71.15

$24.49

$68.31

$22.06

$30.30

$198.61

$62.98

$87.60

$71.15

$68.31

$48.94

$173.93

$41.54

$90.25

$90.25

$80.85

$44.15

$29.92

$27.85

$29.02

$208.22

$208.95

$74.14

$32.06

$42.39

$24.87

$110.27

$32.70

$33.36

Shopping Cart: 0 Items

Total: $0.00

Your Wishlist: 0 Items

Total: $0.00